What I have done so far
Milestone 1 Made up the design
Milestone 1 Setup Dhcp for ipv4 on north and south and dhcp for ipv6 on central
Milestone 1 I have setup vlans for management, students, academic staff, and admin staff.
Milestone 1 /2 Have setup intervlan routing on some of the routers
Milestone 2 setup Ospf and check adjacencies
Milestone 2 Setup the vlans on that asas for dmz, outside and inside
Milestone 2 I have setup frame relay between campuses
Milestone 2 I have setup gre tunnels over frame relay
I have attempted to configure
Milestone 2 An ips this did not work
Milestone 2 Voip also did not work it is possible I will and will be configured
Milestone 2 IPsec VPN does not work on packet tracer so I had to go with GRE Vpn
This point is milestone 2 due 26 September 2014
At this point dhcp is working alright and I can ping from end host to end host one it has received and address via dhcp. Pinging Through the asa is hard and there is no sign of connectivity between inside to outside at this point. I have not set up many access-lists for the reason that they could interrupt with the testing and pings. I have made the tunnels and can ping from one side to another. But each time I set up all the campuses together I must reapply the source of the tunnel for it to activate.
I am also attempting to simulate an external web server for internet connectivity testing the internet connection is at the central campus and for north and south the need to access it via the central connection to them
Ip phone will be setup as i now know how i can get it working i need to use a different router on packet tracer
No comments:
Post a Comment